worldbound4now
Well-known member
I just finished up a modest install of the Blazer BH2010 horn kit that Autozone sells. It includes the necessary relay but no useful wiring. Following the FJRTECH instructions on installing Magnum Blaster horns was helpful, but I still managed to blow the horn fuse once, found my error was a hot wire that I failed to connect to the relay on my rough install. There seems to be plenty of clearance on my '05 on the left, but the right bracket had to be drilled shorter to raise the horn higher. This brought the horn further away from my superbrace with at least 1/2 inch clearance.
On my first hit of the horn button, I jumped out of my skin. I'm not sure the decibel rating on these, but do not hit the horn in a closed garage!
On my first hit of the horn button, I jumped out of my skin. I'm not sure the decibel rating on these, but do not hit the horn in a closed garage!
Last edited by a moderator: