Did Throttle spring fix and MUCH better, but still hard to Roll on Power

[MyFJR1300]

I have a 06 fjr and i was having a REAL tough time appling power through in ,, i just couldnt do it at ALL ,, it was bad, if i tried it would translate to poping the throttle open,, scarey,,

i found the throttle spring procedure here on the board,, and peformed it,, Very nice,, i would say 70% of the issue is gone,,

I also tigtend up the throttle play with the cable adjuster on the cable itself,,,

BUT i still have a hell of a time pouring on throttle mid turn and exiting turn as the throttle is SO sensative i have to jjjuuusssstt crack the throttle a slight pinch,,,

ive been riding my entire life,, im 47,, its not me

i also have a 1994 vfr,, no issue

busa, no issue,,

v-max - no issue..

i have 6k on her,,

other than this she is silky smooth,, and i have to stress even here its not bad,,

was wondering if anyone has experienced this one ???????

 

[kaitsdad]

Check out the Bin o Facts - bin o facts

What you're interested in here is the G2 Throttle Cam farkle. Makes a huge difference.

 

[flapsup]

What Kaitsdad said!!! :clapping:

G2 was the fix for me too. About $45 and 15 minutes.

New set of grips made the process easier instead of trying to save the old ones.

 

[dwilli]

Agree.

G2 Throttle and new grips or Grip Puppies.

 

[Rickster]

+1 on the G2 Ergo Cam

 

[okmac]

If you go with the G2, make sure you re-adjust the throttle cables.
If you do not adjust them properly (specifically if the cables are too tight), G2 with the center spring released can cause the throttle be a little sticky on the return.

Also make sure when you remove the plastic housing in order to remove the throttle tube make sure when you re- assemble it you have the little plastic tit engaging the indentation in the handle bar . If you don't the throttle cable will probably stick a little when you close throttle.

Don't ask me how I know.

Mac

 

[temp357]

shoot me

if we must...

g2 - 20%

pciii - 40%

wally map - 40%