FJR ABS Test Harness

[Bounce]

I didn't see this posted here, so thought I'd make sure anyone interested didn't miss it.

This is an owner-crafted pigtail that will do the job of the field service tech item from Yamaha but do it at a fraction of the cost. $7 ain't shabby.

It lets you flip a switch to manually cycle the ABS pump during brake flushes (or any time you want).

https://www.fjrowners.com/forums/11-fjr-parts-servicing/145887-fjr1300-abs-test-harness.html#post1199323

 

[Pterodactyl]

I am a proud owner of one of Rays test harnesses. It works well, easy to install and clear instructions.

 

[Canadian FJR]

Great product and an awesome price. I am curious if it is beneficial to intentionally activate your abs from time to time to avoid the fluid to become stagnant in the abs system.

Canadian FJR

 

[Pterodactyl]

Great product and an awesome price. I am curious if it is beneficial to intentionally activate your abs from time to time to avoid the fluid to become stagnant in the abs system.



Canadian FJR

I do this often... can't hurt, but the harness now accomplishes the same thing. For our Beemers Ihave a GS911 diagnostic device that allows for testing and bleeding the ABS pump much like the harness does for the FJR.

 

[Canadian FJR]

More good info here;

https://www.fjriders.com/forums/viewtopic.php?f=65&t=4069&p=83697&hilit=Bleeding#p83697




Canadian FJR

 

[bigjohnsd]

I had one of Ray's Beta Test Harnesses,

It worked great, can be installed permanently or connected and removed.

Gifted it to a smart ass School Administrator from Illinois when the FJR went South.

I have a cell phone app, "MotoScan" which accomplishes the same thing on "Freya" via the OBD port and a Blue Tooth Adapter/Transmitter and Cable

 

[SkooterG]

I wasn't aware Ray was making one. Silly me. I did find one on Amazon months ago and put it to use recently.

https://www.amazon.com/gp/product/B00ZPJ8GFC/ref=ppx_od_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

 

[extrememarine]

Thanks for the cross post - Ray's ABS test Harness is available for purchase in the storefront I use for EOM registration (www.attacktheroad.com/shop). There is also a downloadable PDF instructions sheet available (free) here.

Let me know if this should go in the e-commerce section or if the link is fine here.

Wayne

I didn't see this posted here, so thought I'd make sure anyone interested didn't miss it.
This is an owner-crafted pigtail that will do the job of the field service tech item from Yamaha but do it at a fraction of the cost. $7 ain't shabby.

It lets you flip a switch to manually cycle the ABS pump during brake flushes (or any time you want).

https://www.fjrowners.com/forums/11-fjr-parts-servicing/145887-fjr1300-abs-test-harness.html#post1199323

 

[2GENAE]

Rays ABS test harness works on the AE models YCC-S connector to access DIAG codes.

 

[donaldb]

I didn't see this posted here, so thought I'd make sure anyone interested didn't miss it.
This is an owner-crafted pigtail that will do the job of the field service tech item from Yamaha but do it at a fraction of the cost. $7 ain't shabby.

It lets you flip a switch to manually cycle the ABS pump during brake flushes (or any time you want).

https://www.fjrowners.com/forums/11-fjr-parts-servicing/145887-fjr1300-abs-test-harness.html#post1199323

I ordered this test harness a couple months ago. It arrived as and when promised. Unfortunately there were no direction/instructions accompanying the harness. Is there a thread or a link that someone could post here that will direct me? I'm in need for directions for a gen 1. I'm not a member of the fjrowners group so I am unable to complete the link/connection to these directions. Thanks

 

[RossKean]

I didn't see this posted here, so thought I'd make sure anyone interested didn't miss it.

This is an owner-crafted pigtail that will do the job of the field service tech item from Yamaha but do it at a fraction of the cost. $7 ain't shabby.

It lets you flip a switch to manually cycle the ABS pump during brake flushes (or any time you want).

https://www.fjrowners.com/forums/11-fjr-parts-servicing/145887-fjr1300-abs-test-harness.html#post1199323

I ordered this test harness a couple months ago. It arrived as and when promised. Unfortunately there were no direction/instructions accompanying the harness. Is there a thread or a link that someone could post here that will direct me? I'm in need for directions for a gen 1. I'm not a member of the fjrowners group so I am unable to complete the link/connection to these directions. Thanks

Have a look at the original post by ionbeam

https://www.fjrforum.com/forum//index.php/topic/136000-test-and-maintain-your-abs-system/?hl=+brake++test

 

[donaldb]

I didn't see this posted here, so thought I'd make sure anyone interested didn't miss it.

This is an owner-crafted pigtail that will do the job of the field service tech item from Yamaha but do it at a fraction of the cost. $7 ain't shabby.

It lets you flip a switch to manually cycle the ABS pump during brake flushes (or any time you want).

https://www.fjrowners.com/forums/11-fjr-parts-servicing/145887-fjr1300-abs-test-harness.html#post1199323

I ordered this test harness a couple months ago. It arrived as and when promised. Unfortunately there were no direction/instructions accompanying the harness. Is there a thread or a link that someone could post here that will direct me? I'm in need for directions for a gen 1. I'm not a member of the fjrowners group so I am unable to complete the link/connection to these directions. Thanks

Have a look at the original post by ionbeam

https://www.fjrforum.com/forum//index.php/topic/136000-test-and-maintain-your-abs-system/?hl=+brake++test

Thank you!

 

[RossKean]

...or simply use an alligator clip with a weak enough spring so it doesn't bend the pins...

Or a test lead with clips on both ends.