Front right turn signal loose

[opr917]

So I went to the garage today and to my surprise my front turn signal (03 FJR) is loose! I don't have a clue how this attaches to the bike, anybody has a diagram or know how I can repair it, doesn't seem to be broken. Thanks !

 

[wfooshee]

It actually just pops into the fairing on the '03. The pop-in pop-out lets it live through an "incident."

 

[opr917]

It actually just pops into the fairing on the '03. The pop-in pop-out lets it live through an "incident."

Thank you!, all I need now is to find out how to remove the fairing to pop it back. I tried to force it back, but the solid piece of plastic in the back does not allow me.

EDIT: found a post showing how to remove the fairing

 

[xcsp]

Maybe this exploded view of the turn signal will help?

https://tinyurl.com/8at5hpr

Guess Yamaha's site won't allow to save a page in the above link, so you will need to go to "proceed to parts catalog" and choose your bike, and once to "step 4" select "flasher light"

Not sure why your is loose, but if item #9 (stopper plate as Yamaha calls it) in the above diagram is not put on correctly, will cause the signal assembly to be loose.

 

[opr917]

Maybe this exploded view of the turn signal will help?

https://tinyurl.com/8at5hpr

Guess Yamaha's site won't allow to save a page in the above link, so you will need to go to "proceed to parts catalog" and choose your bike, and once to "step 4" select "flasher light"

Not sure why your is loose, but if item #9 (stopper plate as Yamaha calls it) in the above diagram is not put on correctly, will cause the signal assembly to be loose.

Thank you, very useful link.

I believe that indeed the 'stopper' was not put correctly.