Galfer Wave Rotor Stutter

[Lake Powell]

Mystery solved. Installed stock rotors and braking is as smooth as can be at any speed. I'll be talking to Galfer tomorrow.

Sorry you're having problems, mine have been on for over 5000 miles with no probs.

Maybe you just got a bad set?

 

[GalaxyBlue]

In the service manual they say that if the runout is over the spec to remove the rotor and rotate it one bolt hole and retighten and check.


FYI mine were perfect.

Can you point me in the direction of the service manual? I don't have mine anymore. I tried Google, And could not find anything with runout.

 

[I'mAllIn]

In the service manual they say that if the runout is over the spec to remove the rotor and rotate it one bolt hole and retighten and check.


FYI mine were perfect.

Can you point me in the direction of the service manual? I don't have mine anymore. I tried Google, And could not find anything with runout.

I've had my Galfer rotors off and back on about 4 times. I doubt I re-installed them in the exact same spot every time, so that theory is off..!

 

[GalaxyBlue]

In the service manual they say that if the runout is over the spec to remove the rotor and rotate it one bolt hole and retighten and check.


FYI mine were perfect.

Can you point me in the direction of the service manual? I don't have mine anymore. I tried Google, And could not find anything with runout.

I've had my Galfer rotors off and back on about 4 times. I doubt I re-installed them in the exact same spot every time, so that theory is off..!

I guess i will put the stockers back on. Are you in contact with Calsportbikes for an exchange refund yet? I will need to do the same also...

 

[odot]

Kinda sounds like stock was the way to go in the first place, here. But, I bet them fancy waves look real purty when yer pushin the scoot down the street......kinda like chrome on the ol harley.