Gen 11 Linked ABS Barkes

[RICK K]

Is there any explanation on how to bleed the brakes on this forum. My VTX 1800 has to be done in a certain order because they are also a linked system. I have a 2008 fjr1300a Thanks, Rick.

 

[ScottyUSN]

Here's the quick answer: Link

Here's the best way to search the forum: Link

 

[Donal]

Here's the quick answer: Link

Here's the best way to search the forum: Link

When following Scotty's link, just make sure you read all the posts. There are a number of differing inputs, well worth reading and understanding

Don

 

[RossKean]

Lots of people make a big fuss over stuff you need for a brake/cluch hydraulic flush. Speedbleeders and/or Mitivac (vacuum bleeder) have their proponents (i.e. worshipers) but neither really is necessary.

I do, however, use a large syringe to mostly empty the reservoir and mop out the reservoir with paper towels before adding fresh fluid and beginning the bleeding process. Just keep adding fresh fluid and bleeding until the fluid runs clean.

Easy job.

Ross

 

[RICK K]

Thanks for all the information. Just what I was looking for. This is a great forum. Rick