Grease nipple install for linkages.

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 8, 2005
Messages
19
Reaction score
0
Hi all,

Does anyone out there have a detailed description with photo's of how to install grease nipples on the linkages?

Regards, Glenn :agent:

 
U mean like these photos I stole?

19647.jpg


19648.jpg


There was a thread on the old board about this & openion was that U have to have a grease fitting on one end and a removeable plug on other end so the grease could go thru the bearings and out the removeable plug.

When I lubed my suspension I elected to not instal grease nipples. You are in for a treat removing the center stand bolts. I have a write up on the whole thing but it is long. Ping me & I will E-mail it to you.

Later,,, De

 
Last edited by a moderator:
Top