Grip Puppies Tip

[chazglenn3]

I got my set of Grip Puppies in today and went about the task of installing them. Using the soapy water method that was recommended by the manufacturer, I ended up tearing one slightly. I don't have an air compressor so that was out. I started thinking of slippery substances and had a brainstorm...hand sanitizer! Slick as snot and evaporates completely! Had them on in no time! Just thought I would share if anyone else has an install of these coming up.

 

[fisherdave]

Many thanks for the tip! I always put Grip Puppies on my bikes, and I have spent a fair amount of time fighting to get them on. I will remember this one.

 

[Bluestreek]

Air compressor easy peasy. You gotta know someone that has one.

 

[El Toro Joe]

I just replaced my worn out Grip Puppies with a set of Grip Buddies...they go on much easier.

https://www.originalbeemerbuddies.com/

 

[Bill Lumberg]

I ordered grip puppies. Threw them in the trash shortly after unpacking them and trying to put them on. Ordered Grip Buddies, much higher quality and easier to put on. I love them.

 

[radiummadman]

The easiest is to take some good black electrical tape, wrap around the grip in a spiral leaving 1/2 " between tape as you wrap & shiny side out. leave 6" of tail at each end.

Spray inside puppies and on tape & slide on with a twisting motion in the same direction as the spiral of tape. pull the tail unwrapping it in the opposite direction it was installed

until it comes out no pulling, no tearing no cussing about a 2 minute job.

 

[Fly Bye]

I installed Grip Puppies giving them a good amount of hair spray and they went on with ease.

After time I replaced them with Grip Buddies. These are a more robust grip and do not get soggy in wet weather.

 

[FJRRYDER]

Wrapped the stock grips with a cushy black bicycle bar tape, with an extra wrap in the center. Secured the ends with a slice of bicycle inner tube. Very nice.

 

[JSaul]

I used hairspray and had no issues on multiple bikes. I do like the looks of the grip buddies. Thanks for the tip on hand sanitizer.

 

[metalman]

I ordered grip puppies. Threw them in the trash shortly after unpacking them and trying to put them on. Ordered Grip Buddies, much higher quality and easier to put on. I love them.

Bill don't you have a '14 model bike? Do these work satisfactory with the heated grips?

 

[Full House]

I just replaced my worn out Grip Puppies with a set of Grip Buddies...they go on much easier.
https://www.originalbeemerbuddies.com/

+1

 

[Bill Lumberg]

I've never used them with anything other than heated grips. They work great with heated grips.

I ordered grip puppies. Threw them in the trash shortly after unpacking them and trying to put them on. Ordered Grip Buddies, much higher quality and easier to put on. I love them.

Bill don't you have a '14 model bike? Do these work satisfactory with the heated grips?

 

[Biquer]

They work ok with heated grips. I've found the bigger diameter just didn't feel right and would cramp my hands, but only on very big mileage days!

 

[Warpdrv]

Hair Spray is the best method I have found. I'm sure other things work, haven't tried the air compressor though.......

Now this hair spray thing seemed like a simple thing to me - but I'm Bald......

 

[Bill Lumberg]

And male, presumably.

 

[rbentnail]

Hair spray- been using it with grips for decades. Works fine.

 

[Bill Lumberg]

Astroglide.

 

[rbentnail]

I'm pretty sure Astro isn't appreciating that...

 

[Bill Lumberg]

Rastro?