More PCIII Q's

[radman]

Is there enough wire to relocate the PCIII to under the pass seat? With a cruise install coming up, there isn't gonna be any room in the tool tray for it and a PC. Where have you ABS guys put everything?

 

[ionbeam]

The PCIII can be wiggled into the tail section. I chose to just buddy up the PCIII with the tool kit.

I have an '04 ABS with an Audiovox cruise installed. I wanted to keep my tool tray so I put the AV servo in an area that is out of the way but I don't think anyone else would put their unit there. Clicky, ya can't miss the pixs. I ride with the bags on almost all the time so this location works for me. YMMV The AV servo is out of the way of both the tire and the bag. So far the cruise has 20k miles on it in this location with nary a problem.

Alan

 

[radman]

Yeah, I saw that earlier ion, I however travel bagless often, so it would kinda stick out there. I don't mind losing the tool tray area, as with a tank bag always on, and all that room in back, I don't see any real loss of storage area as a problem. With all the ABS hardware on the right side, that kind of kills any thoughts of locating anything over there. As long as the PC will sit back there, I'll be good to go. I love having these kinds of problems... Thanks.

 

[valetz]

If you're very creative you can fit it infront of the tool tray...

-bvw.

 

[Grumpy]

I agree with Valetz, put it right in front of the toot tray over on the right hand side of the bike.

 

[BrunDog]

That's a good spot, just hope the damn thing is heat proof!!

-BD

 

[radman]

That's a good spot, just hope the damn thing is heat proof!!
-BD

My concern also. I'm sure it's good to a degree (haha, get it?) but it's not wise to cook it if I don't have to. I guess we'll see-Gary McCoy is, as usual, blasting it to me and I'll have it Tues to play with. Appreciate the responses.