my newest $6.00 farkle

[sonicspeed]

I have been looking around for a cupholder to put on my FJR. I did all the forum searches and actually found quite a few good ideas, but they still just wasn't what I was looking for.

So off to Wally World i went and got one of those bottle holders that fit on a bicycle. A few wire ties later and presto, just what i wanted

the main purpose of this particular rig is that I am one of the few people who actually like to dip while riding and I needed a good place for a spittoon :yahoo:

 

[Toecutter]

Real men don't spit.

 

[sonicspeed]

Real men don't spit.

never said i was a real man

 

[juniorfjr]

And if'n ya spit and don't clear the bags, that **** will FU the finish. Gotta get me a flip up helmet for those chewing days.

 

[uctofeej]

Yep, ur from Tennessee. Zip-tied cup holder :beach: pepsi bottle :no: pepsi bottle for spittin'.

Seriously, the holder isn't a bad idea.

 

[rangerk9]

sonicspeed,

Nice farkle bro. Also, good to know there are some fellow chewers out there. I have a full face helmet and can't spit too well...so, I resort to the marlboro snus while riding. They don't create any spit and are pretty good. Normally, I chew Lancaster chaw.

What type of helmet are you riding with?

Again, nice farkle.

Rex

 

[wheatonFJR]

Can you give us a picture of that farkle after a full day's riding to see how it worked out? Ya know ya gotta test it...to see if it works.

(And no wipe downs before the picture is taken) :lol:

 

[twowheelnut]

Meh, still doesn't beat the ashtray I once saw...

 

[Mooseonagoose]

Years back I used one of the 'Car-Buoy' [sp] holders fro a marine supply place w/ a stubby beer bottle for the same purpose. Couple of times an officer passed me just as I tipped it back, I always wanted to be stopped for it so I could say "Officer, if you're man enuf to take a pull off of this bottle, you're man enuf to write me any bloody ticket you want!"

If you'll pardon a brief hijack, I note you're using a SWMotech/Bagman bag w/ the cap mount. I just bought one for my '08 [when it gets here]. How ya liking that system?

 

[FJRandy]

Git R Done!!

 

[mcatrophy]

I hope you have a cruise control so you can use both hands to unscrew the top :blink: .

 

[SouthernCruizer]

Ummmm...I notice you forgot to re-install your clutch lever after installing the water bottle holder!! :dribble:

Jay

'04 FJR 1300

 

[sonicspeed]

What type of helmet are you riding with?

Rex

nolan modular

If you'll pardon a brief hijack, I note you're using a SWMotech/Bagman bag w/ the cap mount. I just bought one for my '08 [when it gets here]. How ya liking that system?

i really like it but i wish it was bigger. the more i use it i realize that more room would be nice

 

[sonicspeed]

I hope you have a cruise control so you can use both hands to unscrew the top :blink: .

only an amateur uses 2 hands

Ummmm...I notice you forgot to re-install your clutch lever after installing the water bottle holder!! :dribble:
Jay

'04 FJR 1300

real men don't need a clutch

 

[artistonFJR]

Nice work. I did the same sort of thing with two of the holders. I have a large Kuryakun bag that I mount as a tailbag (big velcro with pad wraps nicely around the pillion backrest so the bag faces backwards) and on the two corners between the velcro and the side pockets I mounted the holders using washers and bolts thru the hardplastic inside shell of the bag. The wife can reach them easily as we ride, but when we stop I don't have far to reach for mine... But I may have to mount one in front now, thanks!!

If I knew how to post a pic I'd show ya! If you are really interested PM me witth a real email addressand I'll picky you.

The next step is a "water bong" helmet...

C

 

[zorkler]

Just what i was looking for and dirt cheap . thanks

 

[sonicspeed]

Just what i was looking for and dirt cheap . thanks

YEA!!!!!!!!!!

i finally actually did some good on this forum

YEA!!!!!!!!!!

:yahoo: :yahoo: :yahoo: :yahoo: :yahoo:

and it's not friday so leave me alone