Photos of new rear LED setups in action

[extrememarine]

Jeff,

Back on topic now, Looks good, who are the LED turn signals made by? (hyperlights?) and how did you mount them?

extrememarine

 

[MSLPILOT]

Brakes only - HyperLites on.

Brakes and left turn on.

Note that each pair of the yellow turn LEDs is set to a different angle.

This makes one pair shine directly at you from over a 60 degree span.

The middle pair are aimed in this pic.

Here's a pic with a bit of fill-flash so you can see the bag reflectors and my messy garage too.

I'll try to add some daylight pics tomorrow for more detail.

Jeff, I just installed my "Back Off" LED license plate frame with LEDs on top and bottom. Everything works great except now my rear running light doesn't come on. The LEDs stay on and of course get brighter and blink when the brakes are depressed, and the rear brake light shines and blinks as it should (because I also installed the Back Off brake light signal module), and all blinkers and headlight shine as they should too. I've checked the wiring and don't see any problems.

You seem like you know what you're doing. Do you have any ideas why my rear light no longer shines? Anyone else? Could it have something to do with the brake light module? This isn't hijacking is it?

Thanks guys. By the way, LOVE the yellow LEDs. Gotta git those!

 

[HaulinAshe]

Jeff,
Back on topic now, Looks good, who are the LED turn signals made by? (hyperlights?) and how did you mount them?

extrememarine

The LED turn lights are something I picked up at the local Yami dealer. Nothing special, just made for sport bike decoration. Can't recall the brand, but they come in different colors (red, yellow, white, blue). They came prewired together with a on/off switch etc. All I used was the lights. I'll check at the Yami dealer next trip around to get the brand. They were about $30.

 

[FJRandy]

Excellent job, Jeff. If you ever feel like upgrading them, go for these.

VERRRY bright, and fairly cheap. I installed these early last year, and they're still working fine.

 

[HaulinAshe]

Excellent job, Jeff. If you ever feel like upgrading them, go for these.
VERRRY bright, and fairly cheap. I installed these early last year, and they're still working fine.

Wish I had that link before I started this project! I looked around for some LED arrows but did not locate any. Have thought about making some type of arrow from tinted acrylic and placing it on top of the LEDs with clear silicone. Guess I might as well order a set of those bad boyz and get busy wiring again!

Story of my life, a day late and a inch dollar short.