Power Commander

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
did you range the TPS to the PC3. I think you have to do that for the map to work correctly or the PC3 with think you have the throttle open and dump more gas. I remember reading something about a proceedure where you turn on the ignition and quickly open the throttle to WOT and then let it snap shut. Someone who has a power commander will have have to point you to the proceedure if you don't know it. I don't have a PC3 :cry:

 
Just to be sure, disconnect the PC and replug the O2 sensor. If the bike is now fine, you may have a bad PC. Let them replace it under warranty!

Then again, the Smoothness map juat may not work for you--it didn't for me. I messed with the HoleShot map for the cans I have, and that worked some. The best was to have Ivan's Performance Products do a custom map. Unfortunately, a condition of the mapping job was that I cannot give it away...so pleae don't ask.

 
yankatar,

That is my plan, I will disconnect the PCIII and reconnect the 02 sensor. I will also check all the connections under the tank to make sure that I did not screw up during installation. The last thing I will do is to let you know if it works.

Pedro :help:

 
Top