running bad (feeling blessed)...limped home (walking on air)

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
You may want to reconsider using anti-seize

Tech Bulletin -

Anti-Seize Compounds on Spark Plug Threads

Topic

The use of anti-seize compounds on spark plug threads that have a metal shell

plating (i.e. Zinc or Nickel plating).

Issue

Applying anti-seize to the threads of spark plugs that have a metal plating allows the installer to mistakenly over-tighten the spark plug in the cylinder head; This stretches and fatigues the threads of the spark plugs, causing a much higher probability that the plug will break during installation or in some cases upon removal.

Example of 10mm thread spark plug broken during installation due to the use of anti-seize leading

to over-tightening. (Note that plug gasket has been completely compressed, anti-seize can be seen

on threads, and the break is in the direction of tightening).

Solution

For spark plugs with special metal plating simply do not use anti-seize on initial

Installation; All NGK Spark Plugs are manufactured with a special trivalent Zinc-chromate shell plating that is designed to prevent both corrosion and seizure to the cylinder head; Thus eliminating the need for any thread compounds or lubricants.

Additional Information

NGK recommends only using spark plugs with metal plating on all aluminum head applications to prevent damage to the head and plug. Metal shell plating acts as a “lubricant” which breaks away from the main body of the spark plug during removal, preventing damage to the spark plug and or threads in the cylinder head.

 
Give me a break! Next you'll be telling us how all the pollen is causing your sinuses to flare up. Go ahead and tell us how everything around you is covered with yellow pollen. Have you no regard for our Northern brethren who are still snowed in?
smile.png


Seriously, I hope you and the bike are both well soon. I am soooo ready to get that FJR back out of Mississippi and on the road where you both belong.

 
I haven't seen my bike since November 16 when I left CA for Pittsburgh. Tough times for me will end with a flight on April 19 back to CA when I'll finally bring the FJR to her new home. You will probably be riding before me. Get well soon sneezy!

 
We have a long time to hear news from Isabella..!!
rolleyes.gif


What about with the girl..?

 
Last edited by a moderator:
For the record I have not heard from Patriot. I work "shift" so my days off are intermittent. I just got back from a family vacation in Arkansas last night so I have been out of the loop. When he is ready, and if he is willing, Patriot and I will coordinate a recovery mission.

 
Top