This simple to install farkle will reduce the infamous buffeting that many riders complain about on their 03-05 FJR. By installing my supplied hardware, your windshield will be tilted back slightly, to allow more air to travel underneath the shield. This farkle will work with any windshield, factory or aftermarket. I did bring some to WFO this year, and to my knowledge, everyone who installed them reported back to me that they noticed an improvement. As always YMMV
An added advantage for my setup with the V-Stream barn door windshield, is that the top edge of the shield is now noticeably lower when in the lowest position.
Tested at elevated speeds for long periods with no ill-effects to handling or rider, I Hope?
NOTE: You are SOL if you have either the FJR Goodies or the N/Line dash shelf installed on your bike!! My spacer kit is not compatible with either farkles.
All hardware is stainless steel to help prevent corrosion.
Price delivered - $24, making this possibly the cheapest bang for the buck farkle, next to a tank of gas to improve rider comfort.
Payment via snail mail or Paypal
Mail a check made payable to Ian Laing in the amount off $24 to:
Ian Laing
16928 B Crestview Drive
Sonora, CA 95370
Paypal $24 to
[email protected]
Thanks for looking! :clapping:
Here is a comparison of side by side, stock and with my spacers installed. The windshield is the VStream.
Stock - low position
Spacer - low position
Stock - Hi position
Spacer - Hi Position