Lawrence
Well-known member
I'm interested
SOCAL Tech Day
- Thread starter Slappy
- Start date
Help Support Yamaha FJR Motorcycle Forum:
ramrezz425
Well-known member
I'm in, I do have relatives in from chicago from 3-26 to 4-2,
I wanna learn!, Do we bring pot luck?
would love to install 1 of my 2 alarms I never could figure out. I will bring my Harbor Freight pliers and ball peen hammer to make adjustments. Dr
I wanna learn!, Do we bring pot luck?
beemerdons
Certifiable Old Fart
Quick question Neil, since I will be assisting johnny80s with the FJR valve adjustments (I have a 5lb. single jack hammer): Will it really matter if I have Cheetos dust on my finger? Really? Really!!!Mmkay, maybe three sixpacks of Coors Light and two bags of Cheetos. And don't be touching things after eatin' those Cheetos!
Last edited by a moderator:
Slappy
Well-known member
beemerdons I will just you a costco container of cheeseballs. How about that? Those little suckers invented orange fingers. Besides isnt there oil in cheese? Oil is a lubricant, there for cheeseballs and cheetos are a perfect food for working on mechanical things.
Neil San Diego
One of "...those guys..."
cometman
Well-known member
I would like to hang out and watch the fun.
beemerdons
Certifiable Old Fart
Sounds Great, Mark! Especially, since your FJR is the one johnny80s and Chuy are going to do the valve adjustment on! Say, do you have a 3' crowbar we can borrow?
Last edited by a moderator:
Santa Fe Dreamin'
Well-known member
"FUN!" What's this "fun" S&%#!!!!
You have obviously never been to one of these tech days.
Last edited by a moderator:
cometman
Well-known member
Too funny Don! I knew this would be fun. I have no idea that tool was necessary. Oh is that how you get the plugs out, I got it. I'll bring some heroin since I think I may need it....
cometman
Well-known member
I think fun is watching your friends talk like their sh#% is the best....... and then watching them break their s$%t in front of you. And no I never been to one. On second thought maybe I will stay at home in bed with my girlfriend. Choices, choices.....what is a guy to do?
ramrezz425
Well-known member
Hey how does tech day actually work, Do we just all wrench on our bikes while others look on and advise or is it specific and directed to particular bike parts ect.
Just wanted to know. DR
Just wanted to know. DR
dj bill
Well-known member
just a giant sword fight is all that ever happens.
yamafitter
Reigning NERDS Granite Lane Gold Medalist
It could be worse. You might end up in Owosso and have Bustanut wrenching on your bike after he has been into the Crown Royal. If BikerGeek ever picks up a wrench near your bike tackle him before any carnage occurs.
beemerdons
Certifiable Old Fart
ramrezz425 and cometman, dj bill is right that we have giant sword fights. But, we also drink tequila shots out of bellybuttons; Chuy just wishes there were girls though!
Last edited by a moderator:
Fairlaner
The Bartender Whisperer
so where and when are you planning this?
R
R
johnny80s
Turtle Gears
I am in. These events are not to be missed.
Slappy
Well-known member
RAMREZ,
Basically how this works is, somone, Neil in this case, offeres up his home and people that have an issue they want to tackle that they dont feel comfortable doing alone, come over and have somone help this complete the task. If you are doing wiring you need to bring your own wiring and connectors. If you need a heat gun or soldering iron you ask if the host has it, if not you need to bring one or ask another attendee if they can bring theirs. Same goes for any speciality tools. These kinds of events are for learning. People that want to work on their bikes doing the work while people that understand how to do the work assist them.
Richard, its at NeilSanDiego's place. He will have directions in the very near future. He is in northern San Diego off of the 78.
Basically how this works is, somone, Neil in this case, offeres up his home and people that have an issue they want to tackle that they dont feel comfortable doing alone, come over and have somone help this complete the task. If you are doing wiring you need to bring your own wiring and connectors. If you need a heat gun or soldering iron you ask if the host has it, if not you need to bring one or ask another attendee if they can bring theirs. Same goes for any speciality tools. These kinds of events are for learning. People that want to work on their bikes doing the work while people that understand how to do the work assist them.
Richard, its at NeilSanDiego's place. He will have directions in the very near future. He is in northern San Diego off of the 78.
Fairlaner
The Bartender Whisperer
ok sounds good...what day are we talking about.
R
R
Neil San Diego
One of "...those guys..."
How about Saturday, March 26th?
OK, after talking with Slappy, it will be the Saturday 19th.
I'll send out directions later to all that ask.
OK, after talking with Slappy, it will be the Saturday 19th.
I'll send out directions later to all that ask.
Last edited by a moderator:
ramrezz425
Well-known member
PM directions if you can, I am gonna bring both alarms and try to get one of them installed. If you need me to bring anything (Food/drink ect.),please let me know. I am gonna bring wire splices, Heat shrink tubing ,tie wraps, 25watt solder iron, Rolaids. dr
Similar threads
