JimLor
Well-known member
Did the maint, repacked with grease. Put back together (noticed that the fork tubes weren't as high as when I started). Felt like crap when I rotated the steering back and forth so.....took it all apart again. Looked at the lower bearing race and lo and behold there were 3 empty holes absent their ball bearings. Found 2, cleaned them and put them back in, they snap nicely. Looked for an hour and couldn't find the third - I know it's stuck somewhere but I can't find it.
I do not want to replace the lower bearings, so:
A. Anyone know the specs for the ball bearing I need
B. Anyone have one lying around I could have
C. If no to A and B I guess I'll replace the upper and lowers, but I really don't want to!!
BTW, everything looked great, no uneven wear, etc.
Thanks.
Jim
I do not want to replace the lower bearings, so:
A. Anyone know the specs for the ball bearing I need
B. Anyone have one lying around I could have
C. If no to A and B I guess I'll replace the upper and lowers, but I really don't want to!!
BTW, everything looked great, no uneven wear, etc.
Thanks.
Jim
Last edited by a moderator: