Good2Go
Well-known member
...Yammy nitrous activation switch? Ejection seat? Drag chute? :lol:
Took it apart and it's just a screw in blank...
Took it apart and it's just a screw in blank...
Thanks! Add this to the list of major, significant, ground-breaking, forward thinking, innovative, performance enhancing, problem solving '07 to '08 changes...my hazzard switch is on the right handlebar.It's the four way flashers on my 07.
We have a winner!!!!On european bikes it is (was!) used for the headlight flash switch.
tom
You need more than the switch. To be functional it would have to include the wiring loom. At last check, it wasn't available in North America.It would be interesting to see if anyone could confirm PN interchangeability. Would this be something UMotors could possibly answer…?
I guess finding the OEM momentary switch for the housing would be the next question.
BustANut appears to be the proud owner of an ‘08. I guess it either slipped out of the factory with the wrong part, or more likely, Yamaha has standardized the back side of the housing.
It would be interesting to see if anyone could confirm PN interchangeability. Would this be something UMotors could possibly answer…?
I guess finding the OEM momentary switch for the housing would be the next question.
That's my thought. But I'd like to use the factory switch. I looked at a parts diagram online and couldn't find the part number. There seems to be a relatively large empty space inside the switch housing, and loading wouldn't be an issue if you wire it to drive an off board relay.I always thought it would be great to get the flash-to-pass switch and make it a garage door opener.
I did use this spot for a aux-light on/off switch. Here is the link to the page.BustANut appears to be the proud owner of an ‘08. I guess it either slipped out of the factory with the wrong part, or more likely, Yamaha has standardized the back side of the housing.
It would be interesting to see if anyone could confirm PN interchangeability. Would this be something UMotors could possibly answer…?
I guess finding the OEM momentary switch for the housing would be the next question.
It'd be a trick spot to put a aux-light on/off if you could locate a weatherproof 2-way rocker small enuf to fit the space that'd handle the load...
Regarding flash-to-pass...I rented a 1200RT and 1200GS each for a day last year, both had this feature. Maybe it was me, but a couple of times I think drivers interpreted the flashes as "go ahead" signals, and promptly turned left in front of me.
Enter your email address to join: