Who has had their FJR Dyno'd??

[FJRONAMISSION]

Just wanted to know some feed back....

B.....

 

[Karl]

Quite a few have. Bone stock and depending on dyno and conditions, most bikes are about 120-125 SAE. Were you just running for #'s or trying to tune for PCIII etc?

 

[FJRONAMISSION]

Quite a few have. Bone stock and depending on dyno and conditions, most bikes are about 120-125 SAE. Were you just running for #'s or trying to tune for PCIII etc?

PCIII and Hole shot slip ons.........

 

[GalaxyBlue]

Mine made 129 hp with the Muzzys and a K&N filter, PCiii

 

[wheatonFJR]

Just wanted to know some feed back....


B.....

You're not going to post the Dyno data?

 

[FJRONAMISSION]

Just wanted to know some feed back....


B.....

You're not going to post the Dyno data?

Okay, Okay......... Just curious ...........

WE did 10 or so runs.........

1st run .......... .....................126.4

Best run................................130.2

I didn't do a TBS yet, and its been more then a year on that........

so maybe I will get a tad more out of it. I really just wanted to make sure it was dialed in with more

than the seat of my pants micrometer........

B

 

[vasteve]

My 07 made 125.28 HP 89.78 max torque. K&N filter two brothers exhaust and a PC-5. Mapped by fuel moto.

 

[C&C]

TBS won't make any difference but your numbers are respectable/typical; good on you, thanks for sharing.

 

[Patriot]

https://www.fjrforum.com/forum//index.php?s...=120164&hl=

 

[Old Michael]

... just wanted to make sure it was dialed in with morethan the seat of my pants micrometer...

Brother Brian, that phrase - coming from you - will forever haunt me.

 

[RadioHowie]

Monkey-->Football

 

[greg97224]

I had mine on the dyno after putting in the powercomander and a custom map. Best run was 123. If someone is getting between 125 and 130, those are pretty good numbers. Still plenty of power for what I use this bike for.

 

[FJRONAMISSION]

... just wanted to make sure it was dialed in with morethan the seat of my pants micrometer...

Brother Brian, that phrase - coming from you - will forever haunt me.

Why you always looking at my ass OM.......... I gotta make sure he always rides in front of me........... :blink:

 

[runner921]

Just had mine dyno'd yesterday I have two brothes, k&n and pc III hp was 122.51 tq was 87.44 I thought this may be a little low.

 

[Bounce]

https://www.fjr-tips.org/maint/dyno/dyno.html

We keep telling everyone the Gen 1's are quicker! Done 2/17/2004 on an Oct 2002 built 2003 model.

131.24 hp, 91.36 lb/ft

 

[not2shabby]

No 2 dynos read the same. If you want to compare 2 bikes, you'd have to run them on the same dyno, back to back. My 2 cents.

 

[Bounce]

Everyone on the slower bikes says that.

 

[RadioHowie]

Everyone on the slower bikes says that.

At least they're "smoother and more refined."

BWAHAHA!!

 

[beemerdons]

Monkey-->Football

Good Call, RadioHowie! Brian does look like a monkey fucking a football on that moped. And what the hell is with these Kalifornians and their butt cleavage on those guys? Sick!!!