garyahouse
newbs need the forum
Today I installed a set of polished stainless steel risers I bought from Michael Burns, an Oregon machinist and forum member. I'm so impressed with the quality, fit, and finish, I thought I'd post them for you. They offer a 1 1/4 rise and adjustable pull back angle. As you can see by the pictures, each one is made of 2 disks. The top disk rotates on a shaft sticking up from the bottom disk, and is locked in place by a pinch bolt.
The lower disk that attaches to the bike has a shaft on which the top disk is mounted by way of a hold down bolt and a pinch bolt. The first bolt insures that the two "halves" can't separate, and the pinch bolt locks the rotating top disk in place once you chose the angle of pull back you want. Check with Mike on price and availability.
Mike's email address is: [email protected]
Gary
darksider #44
The lower disk that attaches to the bike has a shaft on which the top disk is mounted by way of a hold down bolt and a pinch bolt. The first bolt insures that the two "halves" can't separate, and the pinch bolt locks the rotating top disk in place once you chose the angle of pull back you want. Check with Mike on price and availability.
Mike's email address is: [email protected]
Gary
darksider #44