garyahouse
newbs need the forum
Waddooya spoze it weighs?
Gary
darksider #44
Gary
darksider #44
FJ1300RT Reverse Trike Concept
- Thread starter nofreeride
- Start date
Help Support Yamaha FJR Motorcycle Forum:
nofreeride
Well-known member
nofreeride
Well-known member
It's done!
Er, I mean, since it will never be done, it's registered, insured and street legal!
Finished the headlights and the fender brackets and fenders.
It's all dusty in the photos because my shopmate was sanding Bondo.
Next up is a DOT glass windshield.
Er, I mean, since it will never be done, it's registered, insured and street legal!
Finished the headlights and the fender brackets and fenders.
It's all dusty in the photos because my shopmate was sanding Bondo.
Next up is a DOT glass windshield.
Last edited by a moderator:
Auburn
Well-known member
Very nice! :clapping:
Awesome man congratulations on the completion!! Now we'll have to ride together some day... I think I'm headed to Sturgis this year with the trike and another guy who is just finishing his trike down in Colorado Springs. Maybe you could make it too if you're interested?
nofreeride
Well-known member
The wife and I are seriously considering NAFO in B.C. in June. Not a terribly long drive for you, either.
nofreeride
Well-known member
Clutch issues are back.
If I put it in first, and hold the clutch in, after about 30 seconds the car will start inching forward and then die. It's bleeding off clutch pressure. Possibilities?
1. Bad Master Cylinder
2. There is something to the gravity argument, with the bike clutch master cylinder being below the slave.
3. Bleeding issues still?
Other ideas?
If I put it in first, and hold the clutch in, after about 30 seconds the car will start inching forward and then die. It's bleeding off clutch pressure. Possibilities?
1. Bad Master Cylinder
2. There is something to the gravity argument, with the bike clutch master cylinder being below the slave.
3. Bleeding issues still?
Other ideas?
FJRay
Well-known member
If you are not leaking anywhere it has to be losing pressure in the master or slave as in leaking around the seals. I wouldn't think it is air because it does work initialy.
nofreeride
Well-known member
Weight.
There's a weigh station a few miles from my house. It's seldom manned and the scales are usually on. After having the windshield installed, I drove over there.
Front axle: 800 lbs
Whole car: 1400 lbs
Rear axle: 600 lbs
That's with me in the car (~220lbs) and the scale goes in 50lb increments, so I figure the car weighs less than 1200 lbs (1/2 tank gas).
I didn't do corner weights or get out of the car as it was raining and a truck pulled up behind me wanting to use the scale.
I'm satisfied: Front-biased distribution with enough on the rear for some traction. 1200 lbs gives it a power to weight ratio of 8.3 lbs/hp.
There's a weigh station a few miles from my house. It's seldom manned and the scales are usually on. After having the windshield installed, I drove over there.
Front axle: 800 lbs
Whole car: 1400 lbs
Rear axle: 600 lbs
That's with me in the car (~220lbs) and the scale goes in 50lb increments, so I figure the car weighs less than 1200 lbs (1/2 tank gas).
I didn't do corner weights or get out of the car as it was raining and a truck pulled up behind me wanting to use the scale.
I'm satisfied: Front-biased distribution with enough on the rear for some traction. 1200 lbs gives it a power to weight ratio of 8.3 lbs/hp.
nofreeride
Well-known member
Update: It's actually done! Oops, no, spoke too soon. I know it will never be done.
Got the windshield in, and made all necessary adjustments. Changed out the clutch master cylinder, which solved the bleed-down issue that I was experiencing. Added a smoke plexiglass wind blocker, mostly because the hot radiator and exhaust air was venting around the tank and being sucked directly into the passenger compartment.
Detailed it thoroughly for the first time, then took it to a car show. It Attracted a lot of attention, probably because most people had never seen anything like it before. The kids especially loved it.
Still no reverse, and no wipers. I'm contemplating whether or not I will ever add either of the two. The next thing will probably be an anti-roll bar in the front.
Got the windshield in, and made all necessary adjustments. Changed out the clutch master cylinder, which solved the bleed-down issue that I was experiencing. Added a smoke plexiglass wind blocker, mostly because the hot radiator and exhaust air was venting around the tank and being sucked directly into the passenger compartment.
Detailed it thoroughly for the first time, then took it to a car show. It Attracted a lot of attention, probably because most people had never seen anything like it before. The kids especially loved it.
Still no reverse, and no wipers. I'm contemplating whether or not I will ever add either of the two. The next thing will probably be an anti-roll bar in the front.
Last edited by a moderator:
Nice man! Good to see you out and going now. I still have not put reverse on mine and I don't think I ever will. I don't think it's needed. You just have to keep in mind not to park nose down on an incline and your fine. always look for the "pull-through" parking in the parking lots. It's worked just fine for me so far. I've had mine in a couple car shows also, it's pretty cool all the attention it gets! Have fun with it!
nofreeride
Well-known member
Have driven about 3000 miles, including an overnight trip during the summer where the electric fan failed. Overheated and popped the top off the overflow bottle, spewing hot coolant everywhere. Had to wait until the weather dipped below 90 degrees to get home, with no fan and a cork for the lid on the overflow bottle.
No reverse, no wipers, no parking brake. No plans to add any of them, as I don't feel they are necessary.
Last edited by a moderator:
Spud
Well-known member
That is so cool! Looks like a lot of fun. It cracks me up to hear that unique FJR sound coming from something that definitively doesn't look like an FJR. Thumbs up! :yahoo:
nofreeride
Well-known member
All of my photos were on Webshots, and they are gone! I am going to try to clean this up and add back the photos.
nofreeride
Well-known member
I know, old thread. Had to fix the photos once again.
Man, I really miss this thing. Sold it six years ago soon after starting my used car business.
Man, I really miss this thing. Sold it six years ago soon after starting my used car business.
08FJR4ME
-WYNPRO-
Build another one.
Similar threads
