Parts For Sale SOLD: STS Harness for Gen II FJR1300 (one only) $10 plus shipping

[Fishin VA]

Here is what I ended up with when I built a harness for my '21.

 

[richardsutton]

Here is what I ended up with when I built a harness for my '21.

Did you connect the ST2 power feed into the common power wire for the indicators (Blue with Red stripe) as that is already tapped into? It may well work for the Gen3 and will simplify the installation. If it works, it could even have been internally connected inside the ST2 unit but that would not suit other bikes.

 

[Fishin VA]

Did you connect the ST2 power feed into the common power wire for the indicators (Blue with Red stripe) as that is already tapped into? It may well work for the Gen3 and will simplify the installation. If it works, it could even have been internally connected inside the ST2 unit but that would not suit other bikes.

No, I had a power lead already pulled forward from my Fuzeblock, so I used that power connection.

 

[Low Level FJR Pilot]

I've got a 2016 and am getting ready to rip the front end off to replace my mirror stay. That would be a great time to put my STS in. I'd pay for one of these harnesses or for the diagram and parts list for the one you put in your '21 Fishin VA.

 

[Fishin VA]

I've got a 2016 and am getting ready to rip the front end off to replace my mirror stay. That would be a great time to put my STS in. I'd pay for one of these harnesses or for the diagram and parts list for the one you put in your '21 Fishin VA.

Here's the post I made detailing the process, parts, and diagram
https://www.fjrforum.com/threads/sts-turn-signal-harness-for-gen-3-fjr1300.178823/#post-1444624

 

[richardsutton]

I have added my progress to the more relevant thread:

https://www.fjrforum.com/threads/sts-turn-signal-harness-for-gen-3-fjr1300.178823/post-1461599
I believe that my post is still being moderated.

 

[norcal rider]

clicked on your link and got the following:

"The requested post could not be found"

 

[richardsutton]

clicked on your link and got the following:

"The requested post could not be found"

My post is still being moderated. I'm not sure how long that will take but it will appear eventually.

 

[Low Level FJR Pilot]

Here's the post I made detailing the process, parts, and diagram
https://www.fjrforum.com/threads/sts-turn-signal-harness-for-gen-3-fjr1300.178823/#post-1444624

Thanks for pointing me in the right direction. This is very timely! I'd have hated to get the stay work finished and find this later. Don't want to be in there more than once.