macinstien
Member
I need to take the front wheel off of my 2005 non-ABS to get the forks off for an in shop seal replacement. Brakes are off, pinch bolt is loose but the axle nut is not budging...at all!
I am applying a lot of gorilla force on that 19mm driver but the thing feels like it is welded in. I know it is torqued down pretty good but should it be that hard to break it loose and slide the axle out?
I am following the general instruction from my manual and what I found at fjr1300 info
Before I break something I figured I better take a breather and ask fer some advice!
Thanks!
Mac
I am applying a lot of gorilla force on that 19mm driver but the thing feels like it is welded in. I know it is torqued down pretty good but should it be that hard to break it loose and slide the axle out?
I am following the general instruction from my manual and what I found at fjr1300 info
Before I break something I figured I better take a breather and ask fer some advice!
Thanks!
Mac