HelzBelz
HipHopLitePopMetalist
Here are my pics, after 1000 miles. (I spent more than Fred, as my bolt is a 10.9
)
The top bolt in this first picture is the 12mm bolt with stock spacer/collar, and extra spacer at the left end (and it is a little smaller than necessary 16mm) that I used as a temporary fix. I inserted this set up through the smaller hole with the extra spacer inside the larger hole leg. The bottom bolt is a brand new OEM bolt and Collar for comparison.
There is a very slight bit of scoring on the bolt shaft where it passed out of the 12mm hole.
This worked, I think - albeit with a larger gap than we would like. I imagine lots of crud ending up in that gap. The new updated clevis will hopefully address this... then I can throw away the $8 I spend on the 12mm bolt, nut and makeshift collar from my local hardware store, plus the $12 for the OEM bolt and collar (and shipping) from partshark.
![tonguesmiley.gif](https://www.fjrforum.com/forum//public/style_emoticons/default/tonguesmiley.gif)
The top bolt in this first picture is the 12mm bolt with stock spacer/collar, and extra spacer at the left end (and it is a little smaller than necessary 16mm) that I used as a temporary fix. I inserted this set up through the smaller hole with the extra spacer inside the larger hole leg. The bottom bolt is a brand new OEM bolt and Collar for comparison.
![20170412_154559_zpsqgjobwro.jpg](https://proxy.imagearchive.com/2e2/2e20481eec336844de663c02b9f520fe.jpg)
There is a very slight bit of scoring on the bolt shaft where it passed out of the 12mm hole.
![20170412_145114_zpsaljbudxb.jpg](https://proxy.imagearchive.com/92e/92e8263fe1d01cc9a63fd82a2d5cc21f.jpg)
This worked, I think - albeit with a larger gap than we would like. I imagine lots of crud ending up in that gap. The new updated clevis will hopefully address this... then I can throw away the $8 I spend on the 12mm bolt, nut and makeshift collar from my local hardware store, plus the $12 for the OEM bolt and collar (and shipping) from partshark.
![20170325_120156_zpsxmmyrges.jpg](https://proxy.imagearchive.com/07d/07d310481b0601cf45f6441b51c10ed7.jpg)
Last edited by a moderator: