skyway
Well-known member
Custom machined Audiovox CCS-100 mount
Meticulously machined from billet 6061 T6 aircraft quality aluminum. The mount mates perfectly to the control pad supplied with the Audiovox CCS-100 Cruise Control kit. The control pad is recessed in the front of the mount, entirely concealing the wiring harness to provide optimum weather protection when correctly sealed at time of install. The mount also routes the harness out of the bottom, again to provide weather protection and to follow the stock FJR wire harness.
The mount will be available with both left and right side mounting options . Mounting hardware will be stainless steel, including an M10x1.25 right hand thread socket head cap screw. This is the correct size bolt for the unused left mirror mount hole. Also the mounting bolt supplied is not the commonly used M10x1.25 hex head bolt due to the visible handlebar location.
Included in the 2pc. design of the mount is some rotational adjustment for rider ergonomics. This mount is also contoured in the rear to work in conjunction with the 2nd generation V-Strom 1000 hand guards being used by some on the FJR.
Note: The '06 FJRAE has no unused mirror mount hole on the left side, due to the up/down paddle shift assembly. So only the right hand mount will fit this model.
The right side mount will now only be offered in 1 design, this means there will be one right side mount to fit all model year FJR's.
Note: The mount will not be supplied painted or anodized. This will be the responsibility of the buyer. FYI The mount shown in the picture on my bike is painted with semi-gloss black.
Note: If you look closely at the cad image view of the bottom of the mount, you will notice that there is only a small hole out of the bottom. This allows only enough room for the existing wiring loom of the CC Control Pad to fit through. This is required to keep the mount as compact as possible. Riders who have already installed their Control Pad will have to remove the stock supplied connector at the end of this wiring harness in order to route the wires through the hole.
Left side mount - Price delivered to the lower 48 states $84.00 (Note: $86.00 via paypal).
Right side mount - Price delivered to the lower 48 states $100.00 (Note: $102.00 via paypal).
NOTE:For the right side CC mount, I would also like to know which bike you intend to mount this on, either 03-05, or '06.
If you would like one, please mail a check payable to Ian Laing to my shop's address.
In the envelope with the check, please give me your name, forum screen name, address, phone # and specify if you want a left side or right side mount.
Ian Laing
16928 B Crestview Drive
Sonora, CA 95370
Paypal address is ianl <at> pacbell <dot> net
Any further questions I will try to answer below.
Thanks.
Update:
Do you use a Techmount Stemstand in either unused mirror mount locations?
Thought about installing my Audiovox CC Mount but did not want to compromise an already farkled location?
Now you don't have to with my new Mirror Mount "Version 2.0"
The mounting position my Audiovox control pad remains unchanged and integrates the use of the Techmount Stemstand with no additional hardware.
Meticulously machined from billet 6061 T6 aircraft quality aluminum. The mount mates perfectly to the control pad supplied with the Audiovox CCS-100 Cruise Control kit. The control pad is recessed in the front of the mount, entirely concealing the wiring harness to provide optimum weather protection when correctly sealed at time of install. The mount also routes the harness out of the bottom, again to provide weather protection and to follow the stock FJR wire harness.
The mount will be available with both left and right side mounting options . Mounting hardware will be stainless steel, including an M10x1.25 right hand thread socket head cap screw. This is the correct size bolt for the unused left mirror mount hole. Also the mounting bolt supplied is not the commonly used M10x1.25 hex head bolt due to the visible handlebar location.
Included in the 2pc. design of the mount is some rotational adjustment for rider ergonomics. This mount is also contoured in the rear to work in conjunction with the 2nd generation V-Strom 1000 hand guards being used by some on the FJR.
Note: The '06 FJRAE has no unused mirror mount hole on the left side, due to the up/down paddle shift assembly. So only the right hand mount will fit this model.
The right side mount will now only be offered in 1 design, this means there will be one right side mount to fit all model year FJR's.
Note: The mount will not be supplied painted or anodized. This will be the responsibility of the buyer. FYI The mount shown in the picture on my bike is painted with semi-gloss black.
Note: If you look closely at the cad image view of the bottom of the mount, you will notice that there is only a small hole out of the bottom. This allows only enough room for the existing wiring loom of the CC Control Pad to fit through. This is required to keep the mount as compact as possible. Riders who have already installed their Control Pad will have to remove the stock supplied connector at the end of this wiring harness in order to route the wires through the hole.
Left side mount - Price delivered to the lower 48 states $84.00 (Note: $86.00 via paypal).
Right side mount - Price delivered to the lower 48 states $100.00 (Note: $102.00 via paypal).
NOTE:For the right side CC mount, I would also like to know which bike you intend to mount this on, either 03-05, or '06.
If you would like one, please mail a check payable to Ian Laing to my shop's address.
In the envelope with the check, please give me your name, forum screen name, address, phone # and specify if you want a left side or right side mount.
Ian Laing
16928 B Crestview Drive
Sonora, CA 95370
Paypal address is ianl <at> pacbell <dot> net
Any further questions I will try to answer below.
Thanks.
Update:
Do you use a Techmount Stemstand in either unused mirror mount locations?
Thought about installing my Audiovox CC Mount but did not want to compromise an already farkled location?
Now you don't have to with my new Mirror Mount "Version 2.0"
The mounting position my Audiovox control pad remains unchanged and integrates the use of the Techmount Stemstand with no additional hardware.
Last edited by a moderator: