FJR Tech Day XIII

[FJRfarrier]

Geek - add to the list - FJRFarrier - LED light swap (soldiering services needed) and customer PTT switch install.

only if the neccessary people can still see straight by the time I get there, and haven't F'd up too much other stuff.....

 

[BikerGeek99]

Sent JBinIndy the address. All is well.

Git yer ass over here, Tom. If your bike is not road-worthy, take a page from jwilly's playbook - he came to EOM 2011 in his wife's car, with (I shart you not) a trunk-load of beer. Bring local stuff.

Wayne & Julie - I do have a soldering iron and solder. The soldering thing is Tim's forte, but we should be able to get the lights taken care of. I have a smattering of shrink-tube - anyone got a stash they can bring along? Although I think it was TommyKay last year that had some liquid electrical tape? Sound familiar?

Who - Arrive When - Crash Where - Doing What
Geek - it's my place, damnit - it's my place, damnit - TBS; plugs; idle; cruise control
RaYzerman - Friday - guest room - supervise and assist
yamafitter - Friday - guest room - supervise and assist

extrememarine - Friday - air mattress - supervise and assist
pista & Mrs. pista - Saturday - day visit - headlight replacement; LR4 fixin'
bseelbach - Friday - floor or camp - valves
griff - Friday - air mattress - valve check, plugs, pair plates, ES forks
DesignFlaw06 - Saturday - hotel - STS, electrical assistance
TommyKay - ? - ? - supervise and break ****; wiring assistance
Joe (the El Toro one) & Jacqueline (maybe) - Saturday - ? - smoking cigars and breaking ****

AllenC - Saturday - day visit - ES forks; brake & clutch flush

thompsonian - Saturday - ? - Fuzeblock

ckuhns - Saturday - day visit - supervise and assist

boyitgobob - Saturday - day visit - steering head bearings

PhilJet (maybe) - ? - tent - let smoke outta things and break ****

JustinNck1 - Saturday - day visit - bringing Carbtune & steering head spanner

FYB - ? - tent - return yamafitter's sippy-cup

FJRfarrier - Saturday - day visit - laughing at the rest of us; LED light swap (soldering assistance requested); PTT switch

crumpadump - Friday - somewhere inside - TBS; plugs; brake pads

gray ray - Saturday - day visit - Ryan Lochte Speedo bike warsh

mi_pjk - Saturday - camp / hotel - erl change

JBinIndy - Saturday(?) - ? - wire up a Zumo 590

LittleJon - TBD - tent - flush brakes; rebuild engine

Bust & MizzBust - Friday - sheep pen - let smoke outta things

We may have another local guy (Ray - you met him a while back; he kinda looks like Ron Jeremy) doing valves as well. We'll see.

 

[Intech]

I am IN!! (Unless the weather gods decide to make it a monsoon weekend. I am staying in the tent after all.)

I will bring some shrink tubing. I will also bring my tools. I am not doing any work on my bike, so will be able to help anywhere needed. I am interested in seeing the ES forks apart.

 

[DesignFlaw06]

Wayne & Julie - I do have a soldering iron and solder. The soldering thing is Tim's forte, but we should be able to get the lights taken care of. I have a smattering of shrink-tube - anyone got a stash they can bring along?

I'll have the soldering iron and good selection of heat shrink. I've got to do an inventory of what wire I have available. I think I have some black & red 14 AWG from last Tech Day. Don't think I have much other than that. I'll check when I get home, but having too much wire is better than not enough.

Although I think it was TommyKay last year that had some liquid electrical tape? Sound familiar?

Messy stuff. I'm not a fan of it, but won't argue with its use. I'll have splice tape with me if heat shrink won't do.

Assuming my connectors show up this week, or early next week, I should have a plug n play harness for the STS. I'm hoping that will free me up sooner. As far as anyone that needs wiring, get what wires you need to the appropriate spot. I'll make the connections when I get there. If anyone has connections to make to the battery, I suggest ring terminals. I have a couple but more wouldn't hurt if someone has them.

 

[crumpadump]

Announcing FJR Tech Day XIII.
Date: 9/17/2016

Location: Casa de Geek: Marysville, OH

Post up if ya wanna pop in to "supervise" or wanna wrench on yer bike. If yer gonna wrench on yer bike, let us know what you plan on tackling so that all the required pieces and parts are either brought with you or you can ship 'em here.

For anyone who wants to do a valve check: GET HERE FRIDAY! The engine needs to be cold.

If'n there's work being done on your bike, STICK BY YOUR BIKE 'TIL IT'S DONE! You just may learn something.

We have two guest bedrooms (already spoken for) and several inflatable mattresses, plenty of floor space if ya wanna throw a sleeping bag down inside, and plenty of yard if ya wanna pitch a tent outside.

If you didn't make it to the Tech Day we hosted last fall and / or just need our address, PM me.

ETA: Since Tim mentioned "hotel," if anyone would prefer to stay at a hotel, we do have a few in our little city of Marysville:

Hampton Inn (from what my BIL has told me, they have some "interesting" options at breakfast, thanks to the presence of Honda)

Super8

Comfort Inn

Holiday Inn Express

Did I miss it in here somewhere, but is there a full address for Casa de Geek. Thanks.

JBinIndy, I'll be leaving Friday afternoon if you want to ride together.

 

[BikerGeek99]

Intech said:I am not doing any work on my bike, so will be able to help anywhere needed. I am interested in seeing the ES forks apart.

Cool.

I'm also kinda interested in seeing the ES forks apart, not that I'll have any idea what I'm seeing.

 

[pista]

wifey and I are out.

Our daughter just informed us that her "School Marching Band" has a show. On the 17th.

 

[JBinIndy]

Announcing FJR Tech Day XIII.
Date: 9/17/2016

Location: Casa de Geek: Marysville, OH

Post up if ya wanna pop in to "supervise" or wanna wrench on yer bike. If yer gonna wrench on yer bike, let us know what you plan on tackling so that all the required pieces and parts are either brought with you or you can ship 'em here.

For anyone who wants to do a valve check: GET HERE FRIDAY! The engine needs to be cold.

If'n there's work being done on your bike, STICK BY YOUR BIKE 'TIL IT'S DONE! You just may learn something.

We have two guest bedrooms (already spoken for) and several inflatable mattresses, plenty of floor space if ya wanna throw a sleeping bag down inside, and plenty of yard if ya wanna pitch a tent outside.

If you didn't make it to the Tech Day we hosted last fall and / or just need our address, PM me.

ETA: Since Tim mentioned "hotel," if anyone would prefer to stay at a hotel, we do have a few in our little city of Marysville:

Hampton Inn (from what my BIL has told me, they have some "interesting" options at breakfast, thanks to the presence of Honda)

Super8

Comfort Inn

Holiday Inn Express

Did I miss it in here somewhere, but is there a full address for Casa de Geek. Thanks.

JBinIndy, I'll be leaving Friday afternoon if you want to ride together.

Right now, I plan to leave early Saturday to arrive mid-morning, but thanks for the offer to ride along. Maybe we can catch up some other time.

 

[BikerGeek99]

pista said:wifey and I are out.

Our daughter just informed us that her "School Marching Band" has a show. On the 17th.

Bummer! But I understand. See you at EOM?

Who - Arrive When - Crash Where - Doing What

Geek - it's my place, damnit - it's my place, damnit - TBS; plugs; idle; cruise control

RaYzerman - Friday - guest room - supervise and assist

yamafitter - Friday - guest room - supervise and assist

extrememarine - Friday - air mattress - supervise and assist

bseelbach - Friday - floor or camp - valves

griff - Friday - air mattress - valve check, plugs, pair plates, ES forks

DesignFlaw06 - Saturday - hotel - STS, electrical assistance

TommyKay - ? - ? - supervise and break ****; wiring assistance

Joe (the El Toro one) & Jacqueline (maybe) - Saturday - ? - smoking cigars and breaking ****

AllenC - Saturday - day visit - ES forks; brake & clutch flush

thompsonian - Saturday - ? - Fuzeblock

ckuhns - Saturday - day visit - supervise and assist

boyitgobob - Saturday - day visit - steering head bearings

PhilJet (maybe) - ? - tent - let smoke outta things and break ****

JustinNck1 - Saturday - day visit - bringing Carbtune & steering head spanner

FYB - ? - tent - return yamafitter's sippy-cup

FJRfarrier - Saturday - day visit - laughing at the rest of us; LED light swap (soldering assistance requested); PTT switch

crumpadump - Friday - somewhere inside - TBS; plugs; brake pads

gray ray - Saturday - day visit - Ryan Lochte Speedo bike warsh

mi_pjk - Saturday - camp / hotel - erl change

JBinIndy - Saturday(?) - ? - wire up a Zumo 590

LittleJon - TBD - tent - flush brakes; rebuild engine

Bust & MizzBust - Friday - sheep pen - let smoke outta things

pista & Mrs. pista - Saturday - day visit - headlight replacement; LR4 fixin'

We may have another local guy (Ray - you met him a while back; he kinda looks like Ron Jeremy) doing valves as well. We'll see.

 

[Intech]

Why do you still have a ? next to me? I said I am IN!

I will arrive Friday afternoon. Going to take the fun roads through WV.

 

[BikerGeek99]

Now that we know when Bob is arriving, he will be somewhat less questionable.

But only somewhat.

Tim - are you still planning on doing the hotel thing?

A couple of quick thoughts:

1. Service manuals. I have a GenI service manual. It may be useful for us to have a GenII and GenIII service manual handy, just in case. If you have one and have room for it, please speak up.

B. Coolant. I'll grab some coolant so that'll be on-hand.

Who - Arrive When - Crash Where - Doing What
Geek - it's my place, damnit - it's my place, damnit - TBS; plugs; idle; cruise control
RaYzerman - Friday - guest room - supervise and assist
yamafitter - Friday - guest room - supervise and assist

extrememarine - Friday - air mattress - supervise and assist
bseelbach - Friday - floor or camp - valves
griff - Friday - air mattress - valve check, plugs, pair plates, ES forks
DesignFlaw06 - Saturday - hotel - STS, electrical assistance
TommyKay - ? - ? - supervise and break ****; wiring assistance
Joe (the El Toro one) & Jacqueline (maybe) - Saturday - ? - smoking cigars and breaking ****

AllenC - Saturday - day visit - ES forks; brake & clutch flush

thompsonian - Saturday - ? - Fuzeblock

ckuhns - Saturday - day visit - supervise and assist

boyitgobob - Saturday - day visit - steering head bearings

PhilJet (maybe) - ? - tent - let smoke outta things and break ****

JustinNck1 - Saturday - day visit - bringing Carbtune & steering head spanner

FYB - Friday - tent - return yamafitter's sippy-cup

FJRfarrier - Saturday - day visit - laughing at the rest of us; LED light swap (soldering assistance requested); PTT switch

crumpadump - Friday - somewhere inside - TBS; plugs; brake pads

gray ray - Saturday - day visit - Ryan Lochte Speedo bike warsh

mi_pjk - Saturday - camp / hotel - erl change

JBinIndy - Saturday - ? - wire up a Zumo 590

LittleJon - TBD - tent - flush brakes; rebuild engine

Bust & MizzBust - Friday - sheep pen - let smoke outta things

pista & Mrs. pista - Saturday - day visit - headlight replacement; LR4 fixin'

We may have another local guy (Ray - you met him a while back; he kinda looks like Ron Jeremy) doing valves as well. We'll see.

 

[El Toro Joe]

We may have another local guy (Ray - you met him a while back; he kinda looks like Ron Jeremy) doing valves as well. We'll see.

That's a little TMI...

 

[Allen_C]

I have a 2014ES service manual that I'll bring!

 

[RaYzerman19]

I have the GenII and GenIII A and ES manuals, but no '16. Maybe we can get Joe to bring his 2016 manual for some perusing during beer time.

 

[BikerGeek99]

As with most things on the internet, I do not wanna know why you had that picture readily available, Joe. But, if he comes out, you'll see what I mean. If you have ever been to MSTA's Mail Pouch Fly-By, you may have met him. I know he and his wife are in the Outer Banks right now but I'll follow-up with him to see if he's gonna do valves.

 

[El Toro Joe]

I have the GenII and GenIII A and ES manuals, but no '16. Maybe we can get Joe to bring his 2016 manual for some perusing during beer time.

I can bring my factory manual (not the shop manual), as that's all I have, right now.

 

[DesignFlaw06]

Tim - are you still planning on doing the hotel thing?

My plan is to not sleep on the ground, outside, or anywhere that isn't temperature controlled. Hotels aren't exactly in walking distance. I didn't think I'd be the only one going to a hotel. If there's room indoors, I may just bring an air mattress with me so I can participate in evening festivities, provided there is still some space to put one.

I'm flying by the seat of my pants. I don't really have a plan.

 

[BikerGeek99]

Tim - are you still planning on doing the hotel thing?

My plan is to not sleep on the ground, outside, or anywhere that isn't temperature controlled. Hotels aren't exactly in walking distance. I didn't think I'd be the only one going to a hotel. If there's room indoors, I may just bring an air mattress with me so I can participate in evening festivities, provided there is still some space to put one.

I'm flying by the seat of my pants. I don't really have a plan.

Cool. Bring your air mattress. We'll find space for ya.

 

[El Toro Joe]

Room booked for Saturday night at the Holiday Inn Express, Marysville...let the party begin

 

[BikerGeek99]

Room booked for Saturday night at the Holiday Inn Express, Marysville...let the party begin

Excellent!