FJR Tech Day XIII

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Got my Speed Bleeders, brake fluid, fork oil and fork seals. I'm ready!

 
Old guys in thongs? I'm not sure I see the problem....
oh really???

dirt_on_beachpre_zpsmjpzuib2.jpg
Isn't that Petey?

 
Just to update:

Who - Arrive When - Crash Where - Doing What
Geek - it's my place, damnit - it's my place, damnit - TBS; plugs; idle; cruise control
RaYzerman - Friday - guest room - supervise and assist
yamafitter - Friday - guest room - supervise and assist

extrememarine - Friday - air mattress - supervise and assist
pista & Mrs. pista - Saturday - day visit - headlight replacement; LR4 fixin'
bseelbach - Friday - floor or camp - valves
griff - Friday - air mattress - valve check, plugs, pair plates, ES forks
DesignFlaw06 - Saturday - hotel - STS, electrical assistance
TommyKay - ? - ? - supervise and break shit; wiring assistance
Joe (the El Toro one) & Jacqueline (maybe) - Saturday - ? - smoking cigars and breaking shit

AllenC - Saturday - day visit - ES forks; brake & clutch flush

thompsonian - Saturday - ? - Fuzeblock

ckuhns - Saturday - day visit - supervise and assist

boyitgobob - Saturday - day visit - steering head bearings

PhilJet (maybe) - ? - tent - let smoke outta things and break shit

JustinNck1 - Saturday - day visit - bringing Carbtune & steering head spanner

FYB - ? - tent - return yamafitter's sippy-cup

FJRfarrier - Saturday - day visit - laughing at the rest of us

crumpadump - Friday - somewhere inside - TBS; plugs; brake pads

gray ray - Saturday - day visit - Ryan Lochte Speedo bike warsh

LittleJon - TBD - tent - flush brakes; rebuild engine

Bust & MizzBust - Friday - sheep pen - let smoke outta things

We may have another local guy (Ray - you met him a while back; he kinda looks like Ron Jeremy) doing valves as well. We'll see.

 
Think I'll wait until Spring Tech Day for tires. I'm probably close now, but its unlikely I'll see the mileage to wear them the rest of the way before the snow flies.

 
I'm "all-In".

Just booked a room at the Holiday Inn Express for Fri. and Sat. nights.

My plan is to ride the straight, flat, and boring's, on Fri. stop in at the shin-dig in the evening.

Hit the pool and hot tub for rest Fri. night.

Ride some more flat, straight, and boring's, on Sat. stop at the shin-dig for beer and tell some lies.

Hit the pool and hot tub Sat. night.

Hit "Iron Pony" at some point. Then flat, straight, and boring's, home Sunday.

 
Happy to see your weight loss program is progressing well, gray ray...... with the finale at Iron Pony as the greenbacks come flying out of your wallet.....

 
After looking over my bike this weekend, I need to add a few things to the "to do" list for tech day - you guys think we can fit this in?

Steering head bearing service, Fork fluid flush and fill, fork bushing R&R, rear shock linkage service - R&R stuck bearings, valve check, coolant flush, spark plugs, final drive seal replacement, oil change, tire change (front and rear), brake and clutch fluid flush, brake pad change (front), wire in new heated clothing controller (heat-troller), spider maintenance (all 6), blinker fluid flush and fill, air filter change.

I have all the parts except for the brake pads and air filter - does anyone have a set of used ones I could borrow?

smile.png


Wayne

 
After looking over my bike this weekend, I need to add a few things to the "to do" list for tech day - you guys think we can fit this in?
Steering head bearing service, Fork fluid flush and fill, fork bushing R&R, rear shock linkage service - R&R stuck bearings, valve check, coolant flush, spark plugs, final drive seal replacement, oil change, tire change (front and rear), brake and clutch fluid flush, brake pad change (front), wire in new heated clothing controller (heat-troller), spider maintenance (all 6), blinker fluid flush and fill, air filter change.

I have all the parts except for the brake pads and air filter - does anyone have a set of used ones I could borrow?

smile.png


Wayne
I think I got a quart of used brake fluid, a quart and a half of blinker fluid, some old coolant and some worn out brake pads. Used engine oil collection too if you need some, it's right beside some worn out tires I was going to take to the recycle depot. Lemme know if you want any of that.

I have a spare relay arm which I'll bring, have you ever had the center stand off (i.e., replaced the bolts and installed in the opposite direction)?

So, I assume you're going to be there like Wednesday to get a head start on all this................

 
After looking over my bike this weekend, I need to add a few things to the "to do" list for tech day - you guys think we can fit this in?
Steering head bearing service, Fork fluid flush and fill, fork bushing R&R, rear shock linkage service - R&R stuck bearings, valve check, coolant flush, spark plugs, final drive seal replacement, oil change, tire change (front and rear), brake and clutch fluid flush, brake pad change (front), wire in new heated clothing controller (heat-troller), spider maintenance (all 6), blinker fluid flush and fill, air filter change.

I have all the parts except for the brake pads and air filter - does anyone have a set of used ones I could borrow?

smile.png


Wayne
Hmm... I can take care of all this for you. I got garage space and a screw driver.

What's the worst that could happen?

And it's right-loosey, lefty-tightey, isn't it? I swear I just don't understand the metric system - to - Celsius inversion.

 
Looks like Ray has it covered - I'll be there at noon on Saturday - I need to leave by 7pm so hopefully he'll have some help...

smile.png


But now I've reconsidered after Andy's "lefty tighty" comment - I'll just get everything done this weekend so I can help "F" up someone else's bike with Ray and Andy...

 
Top