Possible FJR paint job

[weekend rider]

Only two questions, what tribe and where is your casino going to be located?

I think I would try some other designs just to compare

weekend

 

[v65]

, or if you're into fantasy type stuff, have a FOXNEWS screen-shot with Bush and an approval rating above 36%.
GZ

WTF... the LD guy can take a political pot shot without getting his peepee spanked, but everyone else can"t ?

I see your point, but this is a decent thread, can't we take this somewhere else?

 

[HIGHLANDER]

EDIT !!

 

[zorkler]

looks to loud for me . something more streamlined from front to back

 

[NightShine]

What ever design you choose, perhaps get a fender extender to help protect it!

 

[MotorSWATCop]

If you just want to shock folks, have a picture of Richard Gere's asshole with a dirty gerbil just barely escaping the Chute-O-Death, or if you're into fantasy type stuff, have a FOXNEWS screen-shot with Bush and an approval rating above 36%.
GZ

I'm w/ Highlander on this one. How does this add anything to an "FJR" discussion board. Obviously meant to stir the pot. :asshat2:

 

[dirttracker30]

As some of you may remember, I have been looking for ideas to paint my bike. Don’t get me wrong the silver is nice, but I just want something different. Therefore, I have been shooting ideas around with an airbrush artists and this is his first sketch up.
He took my passion for scuba and worked with it. He said he would take bits of the torn flag and paint it onto the rear section of the bike, but did not give the sketch that much time.

I have never been a skull fan, but I do like this. What are your thoughts?

Link

GAY!!!!!!!!! but it's your bike and money. Looks to much like 99% of the HD crowd's crap. Sorry ,just my unbiased opinion.

 

[git-r-dan]

Don't see how that skull or mural has anything to do w/ scuba. Do like the red for visibility but don't see how you could get red into a scuba thing unless it was "Elmo" or sompin. Seems like an artist could give you a design to remind us of "Sea Hunt" (Lloyd Bridges).

 

[kulwen]

Good input guys.

The skull has nothing to do with scuba. While talking/emailing with him I mentioned scuba and a dive flag, he added the skull on his own. While the skull is not going to happen I do still like a scuba flag that looks like it is blowing in the wind. I do not want a red bike with a white strip. The entire bike will get a paint scheme, the image he sent was just an markup photo.

Here is a section from the first email where I gave him ideas:

**********

Idea one:

Pearlescent white with a very faint real flame pattern. I do not want the flames to over power the bike.

Idea two:

Blue with a very faint real flame pattern. I do not want the flames to over power the bike.

Idea three:

I have a passion for scuba, so a water theme might work. However, I am concerned a water theme would look to girly.

Idea four:

Use the scuba diving flag (red and white) and make it look like it is blowing in the wind.

https://www.gypsydivers.com/images_pages/Scuba/DiveFlag.gif

I would like the flag to have texture. Maybe blowing in the wind, I just don’t want a red bike with a white strip.

Idea five:

I like a US flag theme

https://www.be-unique.com/airbrush/ShowPict...ets/l_911-4.jpg

I am open to your input. I just want to make my bike unique, but not look like a Harley.

**********

I am sure the skull came form his creative side, but it won’t make it to the final paint scheme.

Great idea to take a picture with me on the bike and sent that to him. The photo he used in his markup was some photo he found on the net.

The cost so far does not seem that bad. Here is a section form one of his emails responding to questions from me.

**********

some where around 900 - 1200

i would say about a week and a half

i always put 7-8 coats of clear

**********

Thanks for the input, keep it coming

 

[Scab]

Alrighty then, here goes.

I am highly suspect of a couple of things. If those were the ideas that you sent, and the skull was the result...WTF? Is he listening to you? Or, perhaps he is a one-trick pony. I wonder how many variations of the "skull" he has done. I also have suspicions about the price. Sounds cheap. Too cheap. And...7 or 8 coats of clear? What product is he using? The only clear I know of that will allow that many coats is lacquer and that is near 50-year-old technology.

 

[odot]

I like beeroux's idea best. Mmmmmmmmmmmm.............gerbils.

 

[Checkswrecks]

I'm with Beeroux in that the skull thing just doesn't work. It's like "I wanna be a Harley guy but but but..." I also love to dive, but didn't get the scuba flag idea till you pointed it out, as the skull is so dominating. On the "up" side, you'd be the first on your block!

The bike's big. It's strong. From your avatar (assuming it's you) you're a solid guy, so going bold like you did works. The bike has big solid sides, plus a fairly flat front, so what can you do with those? Everybody loves dolphins and is fascinated by morays, so how about a theme merging a muscular one of those with the dive flag? Or maybe a wavy through the water vision of a Harley on the bottom on it's side and above it is a dive boat with a Yamaha motor? Or of the logo for your favorite dive gear?

Bob

 

[Scythian]

Hell, I wanted a weird HR Geiger 'bio-mech' paint job on mine, but it would probably cost 5K minimum done well....

 

[dirttracker30]

Thay, how's about thome of them BLOW fithys on the thide of it! Sorry,just an idea

 

[rogdeb]

Alrighty then, here goes.I also have suspicions about the price. Sounds cheap. Too cheap. .

My thought also. Cost me twice that for my paint job.

Kinda cool though, without the skull.

 

[TomBo]

As some of you may remember, I have been looking for ideas to paint my bike. Don’t get me wrong the silver is nice, but I just want something different. Therefore, I have been shooting ideas around with an airbrush artists and this is his first sketch up.
He took my passion for scuba and worked with it. He said he would take bits of the torn flag and paint it onto the rear section of the bike, but did not give the sketch that much time.

I have never been a skull fan, but I do like this. What are your thoughts?

Link

Looking for something like this?? Breaks up the grayness and sure a lot less $$

Thats really nice. I like the idea of appliqués. You can change the look anytime (like right after that bank robbery.) Probably us cruiser riders who are the first to paint or personalize. Especially since Yamaha has only one color per year.

UNIQUE is a good thing. Make it yours.

 

[Figstr]

A couple of years ago I was at a rally where a guy with a booth was airbrushing leathers. His bike was in front of the booth with an awesome star wars theme airbrushed all over the bike. Since you're a diver, what about a reef scene? I'm a diver myself and thought about that one too but then thought about what it would probably cost and changed my mind.

 

[turbodave_98]

Thats really nice. I like the idea of appliqués. You can change the look anytime (like right after that bank robbery.) Probably us cruiser riders who are the first to paint or personalize. Especially since Yamaha has only one color per year.

UNIQUE is a good thing. Make it yours.

Thanks for the compliment. I like to personalize my rides also. I am still a cruiser owner with a trickout 96 Royal Star(aka-RedBrute).

 

[kulwen]

Good input on the cost being to low. Could part of the low cost be I am not giving him the bike, only the tins and plastic? He would not remove and replace anything. I will verify anything before I go with this guy.

I have thought about a ocean theme. My concern is it would turn out girly.

 

[FJRMGM]

you know, I haven't seen the "Captain America" theme like what was on Fondas bike in Easy Rider on an FJR - would that work?