Fall Tech Meet

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.
Adam, I plan on replacing my fork bushings, if your going to do your fork oil I would go ahead and replace the bushings if you have never replaced them. I have the list of parts you will need.
Yeah, I had thought that may be a good idea. Could you send me the list?

Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.

I got you down for the valve check.
Oh, excellent. Thanks, Bryan!

 
Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.
Adam, I plan on replacing my fork bushings, if your going to do your fork oil I would go ahead and replace the bushings if you have never replaced them. I have the list of parts you will need.
Yeah, I had thought that may be a good idea. Could you send me the list?

Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.

I got you down for the valve check.
Oh, excellent. Thanks, Bryan!
contact Panman for the parts list of whaat you need to have for it.

 
Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.
Adam, I plan on replacing my fork bushings, if your going to do your fork oil I would go ahead and replace the bushings if you have never replaced them. I have the list of parts you will need.
Yeah, I had thought that may be a good idea. Could you send me the list?

Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.

I got you down for the valve check.
Oh, excellent. Thanks, Bryan!
contact Panman for the parts list of whaat you need to have for it.
I have a new valve cover gasket #5JW-11193-00-00 so no need to order one

parts list for the forks.

(You’ll need 2 of each)

4SV-23135-10-00 METAL, SLIDE 2 (Lower Bushing)

3P6-23135-00-00 METAL, SLIDE 2 (Middle Bushing)

4SV-23125-10-00 METAL, SLIDE 1 (Upper Bushing)

4SV-23115-00-00 GUIDE, COVER UPPER (Washer)

4SV-23145-01-00 OIL SEAL

4SV-23156-00-00 CLIP, OIL SEAL (Ring clip)

4SV-23144-00-00 SEAL, DUST (Dust seal)

You will also need 2 liter of fork oil

Cost from CyclePartsWarehouse.com is around $65.00 (+shipping)

 
Last edited by a moderator:
Qty Item Item # PRICE Total

1) 1 TENSIONER ASSY, CAM 5JW-12210-10-00 75.82 75.82

2) 1 GASKET, TENSIONER CA 5JW-12213-00-00 1.14 1.14

3) 1 GASKET, HEAD COVER 1 5JW-11193-00-00 14.51 14.51 Optional

4) 2 O-RING 93210-47675-00 2.02 4.04

5) 3 GASKET, OIL PUMP COV 5JW-15456-11-00 6.47 6.47

Edit

I'm worried about that #4 item part number we want 2 o-rings for the water pipe and when checking numbers I found this # 93210-18417-00 for those. We got the right stuff but that number doesn't check out.

 
Last edited by a moderator:
Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.
Adam, I plan on replacing my fork bushings, if your going to do your fork oil I would go ahead and replace the bushings if you have never replaced them. I have the list of parts you will need.
Yeah, I had thought that may be a good idea. Could you send me the list?

Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.

I got you down for the valve check.
Oh, excellent. Thanks, Bryan!
contact Panman for the parts list of whaat you need to have for it.
I have a new valve cover gasket #5JW-11193-00-00 so no need to order one

parts list for the forks.

(You’ll need 2 of each)

4SV-23135-10-00 METAL, SLIDE 2 (Lower Bushing)

3P6-23135-00-00 METAL, SLIDE 2 (Middle Bushing)

4SV-23125-10-00 METAL, SLIDE 1 (Upper Bushing)

4SV-23115-00-00 GUIDE, COVER UPPER (Washer)

4SV-23145-01-00 OIL SEAL

4SV-23156-00-00 CLIP, OIL SEAL (Ring clip)

4SV-23144-00-00 SEAL, DUST (Dust seal)

You will also need 2 liter of fork oil

Cost from CyclePartsWarehouse.com is around $65.00 (+shipping)

Qty Item Item # PRICE Total

1) 1 TENSIONER ASSY, CAM 5JW-12210-10-00 75.82 75.82

2) 1 GASKET, TENSIONER CA 5JW-12213-00-00 1.14 1.14

3) 1 GASKET, HEAD COVER 1 5JW-11193-00-00 14.51 14.51 Optional

4) 2 O-RING 93210-47675-00 2.02 4.04

5) 3 GASKET, OIL PUMP COV 5JW-15456-11-00 6.47 6.47

Thanks guys. That should help a few folks get the right parts

 
Bryan, I'd like to attend. If nothing else, I'd love to watch or help a fork flush. Then I can do mine later.

Thanks, Fred

 
I'd like to attend and observe the valve check and CCT change. I'm due for my first valve check ~27,000 miles after having my tick fixed.

The bike also seemed to be kinda noisy from the cam chain area on a cold start so I may do a pre-emptive CCT change or at least have a bunch of you listen to it and argue about whether or not it's a problem. :)

 
I'd like to attend and observe the valve check and CCT change. I'm due for my first valve check ~27,000 miles after having my tick fixed.

The bike also seemed to be kinda noisy from the cam chain area on a cold start so I may do a pre-emptive CCT change or at least have a bunch of you listen to it and argue about whether or not it's a problem. :)

You have a PM

 
I would like to come and hang out, meet people, watch / learn how to work on the bike more. I don't think I will be riding down but if it's a nice enough day I would for sure. October can be a crap shoot for weather.

Scott

 
If possible, I like to do a brake fluid flush and possibly a tire change, thank you and appreciated!

 
Last edited by a moderator:
1346360526[/url]' post='995842']I would like to come and hang out, meet people, watch / learn how to work on the bike more. I don't think I will be riding down but if it's a nice enough day I would for sure. October can be a crap shoot for weather.

Scott
List is updated in the first post. Will be good to see you there.

1346998710[/url]' post='997970']If possible, I like to do a brake fluid flush and possibly a tire change, thank you and appreciated!
Got you added. Make sure to bring brake fluid and something to catch it in.

 
Put me down for the following;

- Rotate the air in my tires

- Pack muffler bearings

- Try and find the elusive sprockets and inspect, oil chain

- Try to solve missing clutch lever mystery

- Polish the ground plane

- Drink Tequila

 
Put me down for valve check #2.

Turns out I can't make it this time. Looks like I'll have to wait till Spring.

Thanks Brian
Gordon, we can arrange to do your valve check at another timewhen you are around.

 
Put me down for the following;

- Rotate the air in my tires

- Pack muffler bearings

- Try and find the elusive sprockets and inspect, oil chain

- Try to solve missing clutch lever mystery

- Polish the ground plane

- Drink Tequila
Rotate air? you just put new air in last weekend.. :p

 
Top