Search results

92000 on my 05 but its harder in the UK cos its only a little island :rolleyes:

I had troubles with the engine management light and eventually couldnt start the bike. On turnover the light would flash on and off , it turned out that the starter solenoid that also houses the fuel injection fuse and connections had corroded and the block had melted taking out the fuse at the...

The simple answer is no the PCIII does it better than the Barbarian mod :yahoo:

Shoei with pinlock . I ride the whole winter in the UK and there is no way I am cracking the visor open even a tiny bit, The cold air just makes my eyes water . The only thing I learnt about the pinlock is if your visor is treated for antimist then the pinlock reacts against it , You can also...

I had the same trouble into my Autocom from my 2720 Autocom's answer was cut the connector off the end and solder the cables together ,this is because in their terms the Garmin connector is sh!te, voila, never had any sound problems since.

I thought that apart from the different colors they were all the same thing 03-07

From experience , one of the things to check when fitting new pads is to clean the rubbish build up under the clips (9) on the diagram. Took me 2 hours to get rid of it , but if you dont then you may well find that the pads are sticking on . Then they dont last very long at all

but if that doesnt work what Autocom tell you to do is cut the thing off its a real PITA .never had a moments problem with it since I cut both plugs off :yahoo:

Somebody asked the question should the engine be running when you set the throttle position to zero by opening the throttle to full and back to zero . Whats the answer ? :dribble:

It is a UK bike so will have an immobiliser so any info is helpful as he cant start the damn thing :dribble:

Hi am hoping someone here knows what error SH53 is a fellow rider has it on his new AE I am not up on the codes for the new models :dribble:

I had my front Storm replaced after 10k miles on it , the new one had to be replaced after 300 miles as it just wasnt round. The fitter reckoned nearly 1/4" difference . The bike was bouncing along the road made my eyes wobble. The next one is good 15grams weight on it and smooth . I do like...

I like twowheelnut am surprised that the your Avon Storms seem so bad . I took a chance last year and put a pair on for my winter riding . I was impressed with the level of grip with them . I did have to change the rear at 7000 with a bad cut from glass that I just couldnt see being safely...

I put a set of Avon Storms on for the winter here in the UK . They have been good tyres , I now have near 7000 miles on them and they have kept me safe through all the wet and cold this winter . They dont have a lot of life left in them now . The front is starting to look as if it would not hold...

I have just upgraded to V9 of the maps and couldnt figure it out Rang Garmin support in UK and within 5 minutes I had a patch from them that downloaded all my maps direct from the dvd to the 2720 . All of europe took 1.5 hours but it replaced all the old maps and didnt bugger up any of the...

The fj club in Uk do rear TOGS ,they fit on the footrest brackets https://www.fjclub.co.uk/fudge/fjr/page14_mushrooms.pdf :yahoo:

If like me you use a Vista throttle lock you dont need a spacer and if you turn them up they get HOT, have only used mine up to medium so far this winter.

I have used one of these for the last 40000 miles and think its great , but I was looking to get rid of the turbulence and noise associated with it I like air flow and ride with the screen almost all the way down all the time . When it rains I put the screen up 3/4 way which gives minimal...

If you slide the back down as if mounting the unit at an extreme angle you should find 3 tiny holes ,then put in sun or by radiator it allows the vapour to go. Mine fogs after using it in the car where I have to use it at the extreme angle , then when I put it on the bike the holes are covered...

I have had a problem with Yamaha because of farkles :- To tell the story in the right sequence . I have vibration under power on the bike and when the TPS was done asked for the dealer to try and find the problem. First the tyres were blamed and I changed them, then the rear wheel bearing was...