OH MAN...I went for a ride today with my new FZ1 mirrors and all I can say is WOW! Did you guys know there is actually **** going on behind us while we ride? These mirrors are worth every penny!! For the first time since buying this bike, I was able to see the lanes next to me, and the lane directly behind me. All without the little convex blind-spot mirrors.
I think the FZ1 mirrors look dammed good, and there is no telling they are not OEM for this bike.
They took me about 3 hours to install on Friday, including a little stint where I dropped one of the mirror stem nuts down into the fairing and had to partially take the lower fairing apart to find it. The install itself was really fast, but I took the time to make two spacers out of some small pieces of rubber.
I traced the shape of the mirror onto the rubber pad and cut it out with a razor utility knife. Then I used my dremmel to smooth the edges and get all the loose pieces off. Making the holes the right diameter with just a drill was the biggest hassle of all of it. During the install, I found some missing fasteners that my dealer lost and never bothered to replace, so I just replaced them from my stash of extras. Now my fairing and all the panels are correctly alligned and fit together properly. :yahoo:
After they were installed, I didn't have a chance to take the bike for a ride, so I waited until today when I went to meet Patch308 for a 400 mile ride through the NM mountians. These mirrors do not have the vibration issues the OEM mirrors have, and I can see way more. ****...I should have done this a LONG time ago.