jorstin
Well-known member
I am in have CC that I got from Fairlaner, just need to know how to make that PVC tube thingamabob
Tech Day at Johnny80s House
- Thread starter johnny80s
- Start date
Help Support Yamaha FJR Motorcycle Forum:
johnny80s
Turtle Gears
Yes this is still on for Sunday the 4th. We need someone to pick up bagels and coffee on the way. PM me if you are going to attend and I will add you to the list and let me know if you can pick up the bagels. Sadly, Fallbrook does not have a bagel store. I will have guacamole and chips. Doors open at 9:00 am.
John
John
dj bill
Well-known member
dammit,take me off list till the next one,i gotta go set up at a bridal show in ontario to find prospective idiots ( i mean brides and grooms) to dj thier weddings.bummer.
johnny80s
Turtle Gears
Jdog,
No cameras this time. Do you really want to watch Richard for another 6 hours? :yahoo: I am down in Fallbrook which is northern San Diego county. I would say I am about 2 1/2 to 3 hours from Ventura. I would love to have you come down so I can check out your camera set up. The You Tube videos of your set up were great by the way. Thanks for posting those.
John
johnny80s
Turtle Gears
2 people confirmed so far. Keep'em coming!
Santa Fe Dreamin'
Well-known member
Last edited by a moderator:
ML-FJR13AE
Well-known member
Voted. I'm not 100% due to work but would like to attend if room.
I've got some electric stuff I need to cleaned up.
Martin
I've got some electric stuff I need to cleaned up.
Martin
Fairlaner
The Bartender Whisperer
I will be down there at some point...
Steve not sure you want to attempt that CC install away from your house (i wouldn't for sure).
R
Steve not sure you want to attempt that CC install away from your house (i wouldn't for sure).
R
jorstin
Well-known member
Richard, I was just thinking that before I read your thread, what if i am stuck and need something or something goes wrong, I think I will do it at home, I think that you are teaching something, thats is a scary thought ha ha
Steve
Santa Fe Dreamin'
Well-known member
Where do I get the fuse box and grounding box from? The items needed/helpful when installing additional electronics.
johnny80s
Turtle Gears
Santa Fe Dreamin'
Well-known member
Thanks. Now I'll have somethign to install during our tech day!!!!!!!!!!!!!!!!!!
It's nice it doesn't take much to excite me.
:yahoo: :yahoo: :yahoo: :yahoo: :yahoo: :yahoo: :yahoo: :yahoo: :yahoo: :yahoo: :yahoo: :yahoo:
Santa Fe Dreamin'
Well-known member
Why don't you add a list to your original post showing the attendies and what each of us can bring??
Santa Fe Dreamin'
Well-known member
What about this one as a very inexpensive alternative: https://www.fjrtech.com/getdbitem.cfm?item=25
Also, has any of our members had any experience with a Magnum Blaster trumpet horns?
Santa Fe Dreamin'
Well-known member
Searching around for something different, I found an LED lighting mfg. in Missouri that has an amazing array of lighting possibilities: https://www.superbrightleds.com/index.htm
You're in luck... I have an unused BlueSea block. For Sale $45. Do you want me to bring it to Tech Day Sunday?
johnny80s
Turtle Gears
I have listed everyone that has confirmed they are going to be there. You are the only one that has said you have a project to bring.
We are going to sit around and watch you install the fuse block. We will also point and laugh.
Neil San Diego
One of "...those guys..."
Lanny, A couple of other things to have for the fuseblock install are:
Main fuse for the line coming from the battery (installed as close to the battery as possible)
Relay for switched power (if you want switched power - most folks do)
A splice for the relay switch wire (I spliced into the rear tail light)
Wire connectors as necesary (ring/spade/butt/etc to connect to battery, wire-to-wire, fuse block, etc)
Assortment of wires...
Also good, but not necesary, would be shrink tubing and heat gun.
Hopefully some of the folks here can help with getting your laundry list together. Don't know if I can stop by, but good luck all the same.
Edit:
Industrial strength velcro is also good for attaching the fuse b ock and relay onto the pan floor.
Last edited by a moderator:
I should receive my new battree today, and fuel tank dampener. I could bring those to install...I have listed everyone that has confirmed they are going to be there. You are the only one that has said you have a project to bring.
We are going to sit around and watch you install the fuse block. We will also point and laugh.
Naw, I'll do that New years day. I could do the dampener though take all of 30 seconds.
I'll also help with any verbal taunting I can.
Last edited by a moderator:
Santa Fe Dreamin'
Well-known member
Ah... OK.
Looks like I have to go back out and shop some more.
I should receive my new battree today, and fuel tank dampener. I could bring those to install...I have listed everyone that has confirmed they are going to be there. You are the only one that has said you have a project to bring.
We are going to sit around and watch you install the fuse block. We will also point and laugh.
Naw, I'll do that New years day. I could do the dampener though take all of 30 seconds.
I'll also help with any verbal taunting I can.
I guess if I can give it out I got to be able to take it also.
Oh, well.
Similar threads
